Vexos Carees | Job Opening - SMT Engineer

Quality Control Inspector - Full-time 6-month Contract 

Days and Afternoon Shifts

SCOPE

Ensure finished goods including repair, rework and refurbishes meet VEXOS and customer quality standards.

 

RESPONSIBILITIES

  • Perform all visual and final inspection steps per work instructions and product process plans in accordance with View Station.

  • Ensure all customer documents, BOM and special drawings or customer specs are being checked for and being followed.

  • Responsible for “first off inspection” of the first 5 boards going through wave solder machine for each new job of each product being run.

  • Ensure the parts are installed on the board as per BOM and View Station.

  • Ensure workmanship conforms to IPC 610 Standards.

  • Verify all processes are performed to the documentation.

  • Report all issues to QC Supervisor.

  • Make sure housekeeping is being done at all areas and is maintained at all times.

  • Ensure that each board is being properly scanned through Tecnomatics, read Tecnomatics instructions in the training aid TR- MFG -04- B for any doubts.

  • Understand that not scanning board and performing the operation without using View Station during operation may be cause for dismissal.

  • Bring all scanning related issues to the attention of the QC Supervisor.

  • Handle and store materials/boards using ESD guidelines.

  • Ensure quality standards are maintained all through the production.

  • Position may involve physical demands such as lifting of heavy objects.

  • Perform any other relevant tasks to help out any other area in production.

  • Perform other tasks as required.

 

SKILLS AND EXPERIENCE

  • Good knowledge of electronic assemblies including through-hole and SMT components, drawings and BOMS.

  • Able to read values and correct polarity of Surface Mount components.

  • Familiar with IPC standards with respect to PCB repair.

  • Knowledge of quality systems and ESD control.

  • Good work habits and housekeeping.

Vexos is an Equal Opportunity Employer committed to diversity in its workplaces and welcomes applications from all visible minority groups, women, Aboriginal persons, and persons with disabilities among other self-identified diverse groups. Vexos thanks all applicants for their interest. However, only those qualified and considered for an interview will be contacted.

 

QUALIFICATIONS

  • IPC Standards and ISO 9002: 1 year (Preferred)

  • In-Process QC/Final Inspection: 1 year (Required)

 

POSITION LOCATION

  • Markham, Ontario

Vexos™ is a trademark registered in the US Patent and Trademark Office.

© Copyright 2020 Vexos. All rights reserved.  |  Privacy Policy  |  Legal